Turn off usage logging

By default, usage logging is enabled for Lasergene. To opt in/out of usage logging:

1. Launch the DNASTAR Navigator.

2. Use whichever of the following commands is available; the command varies by Lasergene version and operating system.
   
   
   • Window > Preferences
     
     
   • View > Preferences > Lasergene
     
     
   • DNASTAR Navigator > Preferences > Lasergene
     
     
   • DNASTAR Navigator > Settings

The following dialog appears:

3. Check or uncheck the box, as desired.

4. Click Apply and Close or Apply and OK, depending on which option is available.